Snowglide tools power supply 100/240AV-12VDC

You may also be interested in the following product(s)

• 
  

  SnowGlide Tools AF-1 electric base and side edge sharpener, B25/B46

  Snowglide tools AF-1 is a precision grinder for base edges and side edges. 1/10 degree adjustable from 85-90° (side edge) and 0-5° (base edge), respectively. The ceramic stone gives the finest edge sharpening, high durability of the edges. Ski geometry is sustained due to its unique construction. It is equipped with double-sided grinding ceramic stone B25 / B46 AF-1, power supply, and transport bag. B25 side of the stone is used for base edges and B46 for side edges.

  In stock

  €3,290.00

  €3,090.00

  - 6%
• 
  

  Snowglide tools Sidewall cutter Push Off

  Snowglide tools Sidewall cutter Push Off is used PUSHED down the ski with lite pressure, NOT pulled as traditional other sidewall planning tools on the market. Unlike other sidewall planers, the PUSH-OFF requires very little pressure. This allows for smoother cutting and more precise control. It has a special brake button. Tightens the cutter shaft when needed to reduce vibration during cutting. Not typically need for sidewall bumper removal, helps in large sidewall removal.

  In stock

  €149.00

  €139.00

  - 7%

  new
• 
  

  SnowGlide tools spare electric connector (type 3) for AF-1

  SnowGlide tools spare electric connector (type 3) for AF-1

  In stock

  €30.00
• 
  

  SnowGlide Tools AF-C electric side edge, B40 (2024)

  Electric side edge on the highest standard. Side edge angle degree-wise adjustable 85-90°. Finest edge sharpening, high durability of the edges. Sustained ski geometry due to its unique construction. AF-C is a standard for technicians in technical disciplines. The device has a unique system of precision grinding, as it slides through the sliding liner during grinding and leans on the curb, thus achieving maximum accuracy. The spring adjusts with the pressure, which is constant. Speed can not be set. With NEW racing stone B40. The New B40 looks to works better than the old B40, it gives the same result on the ski and on snow, but you need less time to get the work finished. It cut as fast as the B46 but leaves no bure like the old B40.

  In stock

  €1,800.00

  €1,690.00

  - 6%
• 
  

  Snowglide tools precision anglemeter for side edge

  Snowglide tools precision anglemeter for side edge. From 90° to 84°.

  In stock

  €89.00

  €79.00

  - 11%

  new